Poultry.nz by Karista

Karista · New Zealand and Australia

Broiler sheds for New Zealand and Australia, from a single panel to a turnkey farm.

Insulated panel sheds with automatic vents and pop doors, heating and chilling through the floor, and the controls to run it all. Buy a component, a shell kit or the whole shed, engineered for your site by Karista.

Request a quote Call +61 416 651 122

05The shed in section

Eighteen metres across, one system at a time.

Pick a system. The drawing shows where it sits in the shed.

Which system?

18 m clear span2 m eave2.4 m12°Frame outside the lining
Clear-span steel framePortal frames stand outside the wall panels and carry the eaves, so nothing interrupts the floor or the lining.See the building shell
Span
18 m clear
Length
138 m, in 23 bays of 6 m
Finish
100 µm epoxy; galvanised purlins

Schematic section of the 18 m reference shed. Panel thicknesses are drawn larger than scale.

06For New Zealand and Australia

Specified for New Zealand and Australian farms.

How the specification answers what growers here are dealing with: the cost of heat, shed air on steel, biosecurity and local electrical standards.

Ammonia · urea · UV

A coating made for shed air

Kristakote 25 was developed in consultation with Beckers for the ammonia and urea inside a poultry shed and the sun outside it: 30 µm of PVDF on the weather side and 50 µm of polyurethane on the lining, both over heavy-galvanised steel.

88% of shed energy

Heat without gas

EECA’s technology scan for poultry growers puts heating at 88% of the energy a New Zealand shed uses, most of it LPG and natural gas. Here the heat comes from heat pumps, a solar roof and stored water.

Source: EECA, Poultry Growing Technology Scan

R 5.15 · R 3.57

Insulated on every face

PIR panel forms the walls, the ceiling and the roof. Walls are R 3.57. Roof and ceiling together are R 5.15 or better.

No visible fasteners

Built to be washed

Walls and ceiling are flat steel with concealed fixings, and every internal corner is closed with a food-grade PVC moulding, so dust and litter have nowhere to lodge.

H5 in wild birds, 2026

Closes from the control screen

H5 bird flu was confirmed in wild birds in Australia and New Zealand in 2026. Pop doors and side vents shut from the controller, and the ridge vents are screened with 3 mm stainless steel mesh.

Source: MPI, bird flu and the risk to New Zealand

AS/NZS · 3-phase

Electrical to local standards

Switchboards, control boxes, sensors and cabling are built from components that comply with AS/NZS standards, around a Rockwell PLC with Beckhoff I/O.

07Karista

Insulated panel specialists since 2003.

Karista has designed insulated panel plants and metal building systems for manufacturers since 2003. Karista Insulated Building Solutions was set up in New Zealand in 2019 to apply that to one building: the broiler shed.

the year Karista began consulting to panel and metal building makers
2003
where Karista has delivered projects
30+ countries
on one PIR panel line: Karista’s first commission, and a world first
12 products
in engineering, panel chemistry, materials and design
5 senior consultants
  • Chartered engineering: CPEng (Engineers Australia), P.Eng
  • PIR chemistry and process safety
  • Coatings, corrosion and materials testing
  • Patented Cam-Lock panel joint, the norm in Gulf cold stores

08How it works

From your site to a commissioned shed.

Six steps, one contact.

Start with a quote request

  1. Send the site and the shed

    Where the farm is, how many sheds and what size, conventional or free-range, your power supply and what you heat with now.

  2. Your site is modelled

    A computational fluid dynamics model runs your shed on your site through each month of the year: air movement, temperature, humidity, CO2 and ammonia. It takes about 25 days.

  3. An itemised specification and quote

    Steel, panels, doors, ventilation, heating and chilling, lighting, electrical work and freight are priced line by line, so you can take out what you do not need.

  4. Manufacture and shipping

    Each order is made, packed into containers and shipped. Karista works with the freight forwarder and passes on freight, duties and clearance at cost.

  5. Erection and commissioning

    A turnkey shed is built and commissioned under one contract. With a kit, your builder erects the shell, and Karista commissions the controls and the heating and chilling plant.

  6. Warranty and support

    Goods carry a 12-month warranty. Panel coatings carry the coil coater’s 25-year warranty against perforation. The control system can be reached remotely for support.

Your contact

Talk to Kerry Hayes.

Kerry Hayes is Karista’s managing director and the second generation of New Zealand’s Hayes engineering family. He has spent more than 45 years in rollforming, insulated panels and metal building manufacture, so the first conversation can start at the drawings.

Request a quote Call +61 416 651 122

09Questions

What growers ask.

Ask Kerry for anything not covered here.

Can we buy only the panels, or only the doors?

Yes. Any item in the range is supplied on its own: wall, ceiling and roof panels, pop doors, side and ridge vents, fans, lighting or controls. Tell Kerry what the shed needs and he will quote those lines.

Will it fit a shed we already have?

Vents, pop doors, destratification fans, lighting and controls can be fitted to an existing shed, and panels can re-line it. Floor heating and chilling is cast into the slab, so it belongs in a new shed or a new floor.

What sizes do you build?

The reference shed is 18 m wide and 138 m long, in 23 bays of 6 m, with a 2.4 m eave. The frame is engineered for each order, so width, length, bay spacing and height follow your site and your bird numbers.

Conventional or free-range?

Either. A free-range shed adds automatic pop doors along the walls: 46 on the reference shed, each with a 2,300 × 450 mm opening. They open and close from the controller.

Does the shed need tunnel fans?

On the reference site in New Zealand the model showed 20.6 air changes an hour by buoyancy alone, with no forced ventilation needed in any of the conditions at that site. Every site is modelled before the ventilation is specified. If a hotter site needs more air or more cooling, the specification changes before you commit.

How is the shed heated without gas?

Reverse-cycle heat pumps heat or chill two 25,000 litre water tanks, and pumps send that water through pipes in the slab. Solar modules in the roof run the heat pumps in daylight, and the grid covers the rest.

What does the 25-year coating warranty cover?

Perforation of the coated steel. It is the coil coater’s warranty, issued for each project, and its terms depend on the site: the sample warranty for New Zealand covers sites more than 2,000 m from the sea. Plan to wash the panels down at least once a year.

Where is it made?

Steel and insulated panels are made by manufacturing partners offshore and shipped in containers. Pop doors and side vents are fabricated in New Zealand to Karista’s design. The destratification fans are made in the United States.

Who builds it?

With a turnkey shed, Karista does: one contract covers engineering, supply, delivery, erection and commissioning. With a shell kit, your own builder erects it from Karista’s drawings.

What does a shed cost?

It depends on the size, the site and how much of the system you take, so there is no list price. Quotes are itemised by system, and freight is charged at cost.

How long does it take?

As a guide, steel and panels reach site about 11 weeks after the order. The heating and chilling plant is the longest item at about 22 weeks, so it is ordered first. Lead times are confirmed with each quote.

Can the outside be a colour other than green?

Yes. Exterior panels are coated to order, and the outside can carry a printed finish under a clear coat. One of the sheds pictured is printed as timber.

Do you supply bedding?

Karista has specified a pine shaving for these sheds, called Karpet: 20 mm deep over a heated and chilled floor, and 50 to 75 mm deep in a conventional shed. Ask Kerry about supply in your region.

Contact

Send the site and the shed. Get a specification and a quote.

Tell Kerry where the farm is, what you want to build and how much of it you want from Karista. A site plan and a shed size are enough to start.

Request a quote Call +61 416 651 122

Managing Director, Karista
Kerry Hayes
Phone
+61 416 651 122
Email
kerry@karistagroup.com